Installing SIM card(s)
Power the terminal off by pressing the power button on the left side of the device selecting "Power off" from the menu displayed.
Remove the rear cover of the terminal by gently squeezing the top left and right corners of the cover and sliding it downward.
To access the SIM card slots, you will need to remove the battery by lifting the clip on the left.
Insert the SIM card into one of the available slots toward the bottom of the device (follow the insertion profile shown by the slots). The device supports up to 2 SIM cards.
Re-insert the battery by lining up the pins on the right of the battery and then pushing it into place.
Re-attach the rear cover by sliding it upward and clicking it into place.
Power on the device by pressing and holding the power button on the left side of the device until the display turns on.
Once turned on, swipe up from the bottom of the screen to reveal the status bar along the top. When connected to 4G, you will see a icon showing signal strength.
SIM settings
- From the main screen, tap "Settings".
- Enter the "Manager Passcode" and tap
- Tap "System Settings" then "Network Settings".
- From the Network & internet page displayed, tap "SIMs".
- From here you can enable/disable data connections and roaming on each SIM.
- You can tap the icon in the bottom left to return to previous pages.
- Follow the steps above to reach the Network & internet page.
- Tap "Mobile Network", then "Advanced".
- Scroll down and tap "Access Point Names".
- Tap + to add a new access point.
-
Enter the following details into the form shown:
- Name: Mobius
- APN: mobius.m2m
- Username / Password: [Contact our Support Team for this info]
Tap at the top of the page to return to the APNs page.
- From the APNs page, ensure "Mobius" is selected.
-
Tap at the top of the page to return to the Network & internet page. If the SIM has been configured successfully, your mobile network will now be displayed.
